XRF solutions for Petrochemistry

Applications

Crude Oil

• Total Sulfur • Organic chlorides • Metals in oil

S, Cl, Fe, Ni, V, Zn, Pb, Mn

Fuels

• Total sulfur • Additives • Metals residue

S, Fe, Pb, Mn V, Ni Ca, Zn, P

Natural Gas

• Total Sulfur (TS) • Total Nitrogen (TN)

S, N

Oils and Additives

• Total sulfur • Elements of additives • Wear metals (diagnostics of frictional parts of engines, gear boxes, reduction gears, etc.)

S, P, Ca, Zn, Ba Fe, Cr, Pb, Ni, …

Lubricants

• Total sulfur • Elements of additives • Wear metals (diagnostics of frictional parts of engines, gear boxes, reduction gears, etc.)

S, P, Ca, Zn, Ba Fe, Cr, Pb, Ni, …

Used Oil

• Total sulfur • Elements of additives • Wear metals (diagnostics of frictional parts of engines, gear boxes, reduction gears, etc.)

S, P, Ca, Zn, Ba Fe, Cr, Pb, Ni, …

Spectrometers and Analyzers

Total Sulfur. EDXRF.

Energy dispersive X-Ray fluorescence

Spectrometers and Analyzers

Total Sulfur. EDXRF.

SPECTROSCAN SE

  • Lowest Limit of detection (LOD) in the class – 1.5 ppm
  • Wide dynamic range 1.5 ppm – 5 %
  • Standards compliance:
    • ASTM D4294

    • ISO 20847, ISO 8754

    • IP 336, IMO 2020 regulation (MARPOL Annex VI

  • Vertical sample cell position:
    • No additional protective film required, low LOD

    • Low interference from sediments, water droplets, air bubbles

    • Safe and reliable – X-Ray optics is protected from sample spills

  • Applicable to all samples: from low sulfur gasoline/diesel to heavy crude

Spectrometers and Analyzers

WDXRF

  • High selectivity
    • Low Limit of Detection (LOD)
    • Low matrix interference
  • Mono-element analyzers and multi-element spectrometers
  • Compliance with widely applicable international standards

Wavelength dispersive X-Ray fluorescence

Spectrometers and Analyzers

Total Sulfur. WDXRF.

SPECTROSCAN SW-D3

  • Designed for detecting ultra-low levels of Sulfur
  • Limit of detection (LOD) – 0.1 ppm
  • Wide dynamic range 0.1 ppm – 10 %
  • Standards compliance:
    • ASTM D2622
    • ASTM D6334
    • ISO 20884
  • Vertical sample cell position:
    • No additional protective film required, low LOD
    • Low interference from sediments, water droplets, air bubbles
    • Safe and reliable – X-Ray optics is protected from sample spills

Energy dispersive X-Ray fluorescence

Spectrometers and Analyzers

Sulfur and Chlorine. WDXRF.

SPECTROSCAN CLSW

  • Simultaneous analysis of Sulfur and Chlorine in oil for quick response and proper oil treatment to protect refinery equipment from corrosion
  • Standards compliance:
    • ASTM D2622
    • ASTM D6334
    • ISO 20884
      accuracy and repeatability comply with requirements of ASTM D4929
  • LOD for Chlorine – 0.2 ppm; LOD for Sulfur – 0.3 ppm
  • Measurement range for Chlorine 1 ppm – 1 %
  • Measurement range for Sulfur 1 ppm – 5 %

Spectrometers and Analyzers

Total Sulfur. Online.

SPECTROSCAN IS-T

Sulfur-in-oil online analyzer

  • Online determination of Sulfur in oil pipelines, at terminals and control of refineries feeding
  • Marine fuel blending monitoring for MARPOL Annex VI restrictions compliance
  • Measurement range 0.02 – 6.00 % covers possible Sulfur content in crude
  • Ex d explosion protection for installation in ATEX Zone 1 and Zone 2
  • ATEX-certified automatic valves
  • Vast communication capabilities with digital and analog outputs

X-Ray transmission (XRT)

Spectrometers and Analyzers

Compact WDXRF spectrometer.

SPECTROSCAN MAKC-G

  • Elements determination from 20Ca up to 92U
  • Compact design, possible to use in mobile lab
  • One analyzing crystal, optical path in ambient air
  • Optimized X-Ray tube power – no radiation control restrictions
  • Stand-alone spectrometer – no Helium and no cooling water required
  • WDXRF spectrometer with an option for up to 2 EDXRF channels for
    elements from 11Na to 20Ca range
  • Direct analysis of solids, powders, liquids, particulates on filters

Spectrometers and Analyzers

Vacuum WDXRF spectrometer.

SPECTROSCAN MAKC-GVM

  • Elements determination from 11Na up to 92U
  • Powerful tool in benchtop format
  • Automatic crystal changer for 4 analyzing crystals, closebanalytical lines are clearly distinguished
  • Optical path is vacuumized – low LODs
  • Optimized X-Ray tube power – no radiation control restrictions
  • Stand-alone spectrometer – no Helium and no cooling water required
  • X-Ray optics on top of autosampler – spill protection

NİMATEK provides not just instruments.
NİMATEK provides solutions for your applications.

Spectrometers and Analyzers

WDXRF. NİMATEK solutions for petrochemistry.

SPECTROSCAN MAKC-G

  • Elements determination from 20Ca up to 92U
  • Compact design, possible to use in mobile lab
  • One analyzing crystal, optical path in ambient air
  • Optimized X-Ray tube power – no radiation control restrictions
  • Stand-alone spectrometer – no Helium and no cooling water required
  • WDXRF spectrometer with an option for up to 2 EDXRF channels for
    elements from 11Na to 20Ca range
  • Direct analysis of solids, powders, liquids, particulates on filters

Quality, affordable, manufacturing and industrial services